How To Set Up Xbox 360 Live

So you have gone out and bought the Xbox 360!? It was a fabulous decision and you will enjoy hours upon hours of playing time with your new device, but before you get started into the wide world of online gaming you are going to need to know how to join together the 360 to the Live network.

Before you do whatever you are going to need to decide how you plan on connecting the bad boy. The 360 supports both wired and wireless connections. In order to use a wireless connection you will need the Xbox 360 Wireless adapter. Personally I find the wireless connection to be a bit too temperamental for my liking so I go with a wired connection via a router, but not every person has the same wireless experience.

How To Set Up Netgear Wireless Router

To set up the connection via a router unplug the router and the modem and turn off the 360. join together an Ethernet cable to one of the out ports of the preexisting router then join together the cord to the back of your 360. Plug everything back in and turn and give the modem and router about 3 minutes to reboot.

Once you have given everything a few minutes to reboot you can turn the 360 back on. If you have already set up a gamer profile you will see the Xbox Live screen. If you have not set up an catalogue you will be prompted to do so. All you need to do is consequent the on screen instructions. It is a pretty cut and dry process and should not take more than 10 minutes of your time.

If you want to go wireless or you must go wireless you will need to get the Xbox360 wireless network adapter. The adapters are available at most market that sell 360 games or you can order it online. Once you have the adapter unplug any Ethernet cable you might have plugged into the 360 then clip the Network adapter to the back of the 360. It is literally easy to see where it belongs, but just in case, the adapter will sit right alongside the Usb port which is right above the Ethernet port. Once you have clipped it in plug the Usb cable that is attached to the adapter into the port on the Xbox 360. Flip up the antenna that is laying flat against the adapter and you are set, well roughly set.

Turn on the 360 and head into the principles tray. You will see Network options, go ahead into that screen and consequent it through to the "Edit Settings" subcategory. The Network name should appear on a list of available networks. adopt your network and enter the password, if there is a password. Exit out and you should be ready to play.

It is all a very straightforward process and Microsoft has gone ahead and made it super easy to setup the network in no time at all. From start to conclude the entire setup should only take about 15 minutes, tops!

How To Set Up Xbox 360 Live

Cristiano Ronaldo Skills HTC Phones Verizon

Read More

Wireless Connectivity - How to Set Up A Netgear Router

There are times when the learning curve in this technologically appealing information age can seem like a mountain range. Once you conquer one peak or obstacle and you think you are the smartest fellow on the planet, an additional one task presents itself and you are off to the treatment cabinet for an additional one blood pressure tablet. I opinion it would be a good idea to document the up-to-date caress I had when trying to way the internet on a new laptop in a friend's home using a modem and a wireless router. The think is that I would have liked it if someone had previously documented the same caress for me. It sure would have saved me some time.

The Netgear Rangemax Wireless N Gigabit Router Wnr3500 is a fine bit of gear. I have previously used this hardware to associate an whole household to the internet. Wireless routers are significant for any home network that merge wireless and wired network connections. It was used previously with the operating principles Windows Xp with an iPstar Satellite terminal iCon Series Modem. The setup was easy because all I had to do was install the software and supervene the instructions. It was a piece of cake.

How To Set Up A Wireless Router

I was working with a newly acquired Acer laptop emachines E727. I was trying to use the router to way the same wireless internet relationship using Windows 7 Home Edition as the operating system. I tried to install software using Cd version 2.0 I received with the router but the error message I received stated that I had a compatibility problem with the version of Windows I was running. I spent quite a bit of significant searching Google for a software upgrade to solve the compatibility problem. I had no luck and so as a last resort I contacted the 'Netgear Support' number.

It is a good idea to confirm that you well have an internet relationship so initially I associated an Ethernet cable from the modem to the Rj45 Ethernet port on the laptop. Once the broadband internet way was confirmed I associated the laptop to the modem straight through the router. The modem is associated to the router via an Ethernet cable from the modem to the yellow way point marked 'Internet' on the router. I have an additional one cable running from ethernet production relationship 1 on the router to the Rj45 Ethernet port on the laptop.

On the bottom right of the laptop there is the internet relationship icon next to the speakers icon. When I moved the mouse over the icon it showed an old internet relationship name. It was therefore significant to log in to the router to convert the settings. This was achieved by typing 192.168.1.1 in the browser window.

The default values for the Netgear Wnr3500 are;

Username: admin

Password: password

Under 'Setup', go to 'Wireless Settings'. Go to 'Wireless Network'.

Go to the 'Name (Ssid)' field and delete the former entry value. Enter a new name in the field for 'Name (Ssid)' using a name that you will recognize. This value could be something as easy as your surname. It can be a value of your choice and must be up to 32 alphanumeric characters. It is foremost to remember that this 'Name(Ssid)' must be assigned to all wireless devices on your network and that this value is case sensitive.

Go to the 'Region' field and settle on your region from the drop-down list.

Go to the 'Channel' field which determines which operating frequency will be used. I entered channel 11.

Go to the 'Mode' field and settle on the desired wireless mode. The default is "Up to 145Mbps", which is the neighbor kindly mode.

Under 'Security Options' I use 'Wpa-Psk [Tkip]'. This is an acronym for Wi-Fi Protected way with Pre-Shared Key. Use Wpa-Psk standard encryption with Tkip encryption type. This is purely a bit of useless information for the useless information department.

At the bottom of the page under 'Security Options (Wpa-Psk + Wpa2-Psk) Passphrase', enter a word or group of printable characters in the passphrase box. The Passphrase must be 8 to 63 characters in length. Use something that you can well remember. If you cannot think of anything, use your mobile phone number.

Click 'Apply' to have your changes take supervene and the router will update. When the router has updated, return to the internet icon at the bottom right of the page and left click. You should have the new 'Name (Ssid)' as the internet connection. If all has gone to plan, you can remove the cable and browse the internet, wireless style. It is the only way to go!

Wireless Connectivity - How to Set Up A Netgear Router

how to set up a wireless router

Wireless Network Detector Wireless Headphones iPod USB Cable Printer To Computer

Read More